警告！

在上面的位置，上下安装板之间的距离是由螺栓长度决定的。

请勿松开螺母（10）！

注意：以下步骤必须在称量物体的所有支撑点下进行！

z 将垫片（6）下的螺栓（7）向上拧，使得上安装板（4）达到上面的位置。

z 使用螺丝刀将上安装板（4）安装到称量物体的支承下。确保使用了正确的上紧力矩，见第 3 章。

z 将安装套件放置到需要的位置。确保上下部分平行并且相互之间保证垂直。

z 为下安装板（5）标记出螺纹钻孔。

z 放置好安装套件（带被称量物体），以便可以攻丝。

z 将下安装板（5）紧固定在地基上。确保使用了正确的力矩，见第 3 章。

z 在上下安装盘之间连接等电位连接导线（不随安装套件提供）

PR 6130/08

The plastic cable junction box PR 6130/08 is a simple solution to connect extension cable and load cells. Nevertheless, the small details make the difference, such as high insulation resistance, suppression of the propagation of parasitic currents…

This junction boxes serves for connecting 1 to 8 load cell cables and one extension cable PR 6135. Two cable glands for 4 cables each are for the load cells, one M20 cable gland is for the extension cable. The cable wires are connected separately, e.g. all wires for "supply +" end at one terminal block; the screens are separately connected, too. PR 6130/04N, PR 6130/64S,

PR 6130/68S

The cable junction boxes PR 6130/04N and PR 6130/6.. are the best solution for connecting load cell and extension cable. They cover the whole spectrum of applications:

application in hazardous areas, W&M and non-W&M weighing systems. Moreover, the stainless steel versions may be used in highly corrosive zones as well as in the extremely clean areas of the pharmaceutical industry. The cable junction boxes PR 6130/64S and PR 6130/68S are made of stainless steel whereas the cable junction box PR 6130/04N is made of painted aluminium (grey). The cable junction boxes PR 6130/04N and 6130/64S connect up to 4 load cells and the cable junction box PR 6130/68S up to 8 load cells with one extension cable in six wire technique.

PR 6135, PR 6136,

PR 6135(A), PR 6136(A)

Cable junction boxes

Extension cable

- Complete connection between load cells and weighing controller

- Cable junction boxes: heavy duty housing made from plastics, aluminium or stainless steel protection class IP 65 – IP 69K - Installation cable:

- Signal transmission over long distances without problems

- Very good chemical resistance

- Insensitive to disturbances because of double screening

– Easy and fast installation

– Mounting kit with dummy included

– Complete programme for all load cellsPR 6201 with capacities between 500 kg and 300 t

– Full stainless steel version available

– Designed to withstand high lateral forces

– Maintenance free including theconstrainer

– Patent pending DE 101 38 435A1

– Approval Certificate “Germanischer Lloyd”